轴对称物体空泡流动的数值计算

基于势流理论和边界元方法,对水下运动的回转体的空泡流进行了数值模拟.将半经验空泡封闭模型由平面流动推广至轴对称流动.对头部为圆锥的圆柱体空泡流动进行了数值计算.分析了空化数、半锥角、空泡长度间的关系.计算与实验结果符合较好.     

数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

移动式排烟在公路隧道火灾救援中的应用探讨

近年来我国公路隧道的建设迅速发展,然而公路隧道由于空间相对封闭,发生火灾情况下的烟气排除成为了难点。结合公路隧道通风排烟方式,探讨临界风速在隧道火灾排烟时的应用,并分析了公路隧道纵向空气流对火灾烟气流动的影响,指出不同流速的空气流对火灾烟气的影响效果不同,同时阐述了隧道内移动风机的气流环流现象。最后提出了基于不同火灾位置的排烟方案,为消防部队隧道火灾的排烟战术提供参考。     

高超声速飞行器中若干气动难题的实验研究

回顾了近几年本研究团队在高超声速飞行器若干气动难题方面的实验研究进展。在边界层转捩方面,测量了边界层转捩现象,研究了攻角效应对圆锥边界层转捩的影响,获得了边界层转捩的脉动特性以其对飞行器表面热流和摩阻的影响。在激波-边界层干扰方面,分析了突起物形状变化对流动特性的影响,研究了复杂外形的流动特性。     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.     

Asymptotic analysis of periodic policies for the inventory routing problem

In this article, a distribution system is studied where the sum of transportation and inventory costs is to be minimized. The inventory holding cost is assumed to be the same for all retailers. A fixed partition (FP) periodic policy is proposed with tight asymptotic worst‐case performance of 3/2 with respect to the best possible policy. This bound cannot be improved in the class of FP periodic policies. In partition‐based PB policies, the retailers are first partitioned into sets and then the sets are grouped in such a way that sets of retailers within a group are served together at selected times. A PB periodic, policy is presented with tight worst‐case asymptotic performance of with respect to the best possible policy. This latter performance improves the worst‐case asymptotic performance of of the previously best known policy for this problem. We also show that the proposed PB periodic policy has the best worst‐case asymptotic performance within the class of PB policies. Finally, practical heuristics inspired by the analyzed policies are designed and tested. The asymptotic worst–case performances of the heuristics are shown to be the same of those of the analyzed policies. Computational results show that the heuristics suggested are less than 6.4% on average from a lower bound on the optimal cost when 50 or more retailers are involved. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

装备保障资源确定技术研究与需求分析系统开发

维修资源是实施装备维修工作的物质基础和重要保证,无论是平时训练还是战时抢修,维修资源都占据着十分重要的地位,不仅影响着装备的寿命周期费用(Life Cycle Costs,LCC),还直接影响着装备的战备完好率以及部队战斗力的保持和恢复.应用更加科学高效的方法确定保障资源,是维修决策面临的重要问题之一.据此,着眼于部队装备维修保障现状需求,将维修任务分配与保障资源需求紧密结合,提出了保障资源确定分析流程,并对分析过程中的关键技术进行了相应的研究,建立了典型的维修决策模型,优化了保障资源配置.最后开发了计算机辅助决策分析系统,为维修资源的优化配置起到了很好的辅助决策作用.     

一类具有时滞和Gompertz增长率的捕食系统的稳定性与Hopf分支

研究一类具有时滞和Gompertz增长率的捕食系统,通过分析系统的特征方程,得到正平衡点的局部稳定性和系统出现Hopf分支的条件,并利用中心流形定理和规范型理论,得到确定Hopf分支方向和分支周期解稳定性的计算公式．     

低速圆管流动的粒子仿真

运用信息保存法对低速圆管的流动现象进行了模拟,并与实验结果进行了比较,粒子仿真结果与实验结果吻合较好,且优于NS方程的结果。研究表明,在对低速圆管的模拟过程中,运用IP法在获得较好的结果的同时,具有比DSMC方法更高的计算效率。IP算法是解决低速圆管流动问题的有效途径。     

基于CANoe的战车综合电子系统任务信息流测试与分析

针对某型战车综合电子系统特定任务模式下相关性能指标较低的问题,对该模式下系统内任务信息流进行规划和梳理,借助CANoe测试工具,以面向任务的角度,分析该任务模式下系统总线性能,提出优化方案,并就相关结论和方案的正确性进行实际测试验证,为探讨特定模式下系统总线性能提供借鉴。